| Cutting Torch |  | Manual cutting blow pipe is a well balanced band type capable of cutting mild steel upto a thickness of 300 mm. It can be used either with dissolved Acetylene or with low pressure generated Acetylene with a suitable nozzle. It can be used with L.P.G. Gas also. Its body is forged with brass, ensuring total safety. Backfire are almost completely eliminated with a specially designed injector. The joints are silver soldered. Supplied with 3/64” nozzle f. or cutting upto 50mm M.S. And 1/16” for cutting upto 100mm M.S. | | Send Enquiry |
| Welding Torch | | Manual cutting blow pipe is a well balanced band type capable of cutting mild steel upto a thickness of 300 mm. It can be used either with dissolved Acetylene or with low pressure generated Acetylene with a suitable nozzle. It can be used with L.P.G. gas also. Its body is forged with brass, ensuring total safety. Backfire are almost completely eliminated with a specially designed injector. The joints are silver soldered. Supplied with 3/64" nozzle for cutting upto 50mm M.S. and 1/16" for cutting upto 100mm M.S.
Manual welding blow pipe L.P./L.D. is a low pressure light duty Welding Blow Pipe. It is designed for use on all lightguage sheet metal in garages and workshops. It is an injector type blow pipe which can be used either with dissolved acetylene or with low pressure generated acetylene. Provided with three detachable swaged copper tips of sizes 1,3,7 for M.S. Welding from 1.0mm to 4.00mm thickness. | | Send Enquiry |
| Gas Regulator | | We are offering gas regulators to our international clients. The regulators are widely used to reduce gas pressure in the cylinders. Our assortment is offered with either one pressure gauge or 2 pressure gauges to show the inlet pressure.
The single stage regulator is fitted with an adjusting screw to reduce the high pressure of the gas to the required working pressure in the cylinder. The welding equipment is available for Acetylene, Argon, O2, Nitrogen, Hydrogen and Co2.
Cited below are the attributes of gas regulators with one or 2 gauges:
• Suitable for all industrial; purposes i.e. welding, heating, cutting and brazing
• Constant gas flow
• Accurate pressure setting
• Die forged Brass Body
• No gas leakage
• Safe & Secure
• Safety relief valve provided
Two Stage Regulator
In a two stage regulator, 2 stages are required to reduce the high pressure of the gas is to the required working pressure in the cylinder. There are 2 gauges fitted with the regulator. One indicates inlet pressure and the other the outlet pressure. Reduction of the pressure is obtained automatically to pre-set level in the first stage. While in the 2nd stage, the pressure is further reduced to the required working pressure by a pressure adjusting screws. Throughout the period of operation, the outlet pressure and flow remains steady. | | Send Enquiry |
| Cutting Nozzle | | Sizes available 1/16, 3/64, 1/32, 5/64, 7/64, 1/8, 3/32.
5/12 - Also available in 12 holes | | Send Enquiry |
|
|
© Jain Weld House. All Rights Reserved (Terms of Use)